Keep smoke, steam and cooking odors moving out of your kitchen with this 400 CFM Broan Select ventilator. It installs inside a compatible wood range hood, adding ventilation while the wood shell provides the decorative finish.

Use it when planning a custom wood hood or replacing a compatible Broan Select ventilator. Check your hood opening and liner before choosing this insert.

• 400 CFM airflow: Helps clear cooking smoke, steam and odors from your cooktop.
• Wood hood installation: Designed to fit compatible Broan wood hood shells and liners; the shell and liner are sold separately.
• Stainless steel finish: Gives the ventilator a clean, finished look inside the hood opening.
• Unit dimensions: Measures 21-3/8 inches wide by 11-7/16 inches deep.
• Required hood opening: Fits an opening measuring 19-15/32 by 10-1/4 inches.
• High-speed sound rating: Operates at 6 sones on the high setting, so you know the rated sound level at full speed.

Match the opening and compatible hood components to the specifications, then add this ventilator to complete your wood hood setup.

NEW

A Stainless Steel Ventilator Built for Wood Hood Installations: This Broan Select ventilator is a 400 CFM power module designed to install inside a compatible wood range hood shell, providing the air-moving performance the decorative enclosure cannot supply on its own.

Key Features:
-400 CFM airflow clears smoke, steam, and cooking odors from the cooktop at full speed.
-Stainless Steel finish gives the insert a clean, finished appearance inside the hood opening.
-Noise rating of 6 sones at the high setting, giving a clear expectation for operating sound level.
-21-3/8 inch wide unit sized to fit a defined hood opening of 19-15/32 by 10-1/4 inches.
-Broan Select series designed to coordinate with Broan-compatible wood hood liners and shells.

What This Ventilator Does in a Wood Hood Build: A wood range hood shell handles the visual work: the species, the finish, the valance, the built-in look over the range. This power module handles the mechanical side. It mounts into the hood opening and pulls cooking air up and out, doing the job the wood enclosure cannot. At 400 CFM, it moves a meaningful volume of air, suitable for mid-output residential cooktops and everyday cooking tasks. The stainless steel finish on the unit keeps the interior of the hood looking intentional rather than industrial when the doors are open.

Fit, Finish, and the Broan Select Series: The unit measures 21-3/8 inches wide and 11-7/16 inches deep, and requires a hood opening of 19-15/32 by 10-1/4 inches. It belongs to the Broan Select series, which means it is matched to wood hood liners and shells confirmed compatible with Broan ventilation. The stainless steel finish is consistent across the unit so it reads cleanly inside the hood cavity. At 6 sones on the high setting, the unit operates at a noticeable but expected level for residential ventilation at full draw. Confirm the hood shell, liner, and opening dimensions against these specs before finalizing the selection.

Who Specifies This Unit: Cabinet shops and designers building out a wood hood installation with a Broan-compatible liner will reach for this ventilator when the cooktop and kitchen size call for 400 CFM. Contractors replacing an existing Broan Select unit in kind will find it a direct match. Homeowners specifying a custom kitchen with a wood hood mantel benefit from knowing the ventilator is chosen alongside the shell and liner, not after the fact. This unit is the air-moving component of a three-part system: shell, liner, and ventilator. The shell and liner are separate products.

The Air-Moving Half of a Wood Hood System: When a wood hood shell is chosen for its look, this stainless steel Broan Select ventilator is the unit that makes it work, bringing 400 CFM of airflow to the Broan-compatible hood opening it was built for.